A & W Trailer
Phone: (630) 964-8897
17 W 411 N Frontage Rd
Darien, IL 60561
2019 Cam Superline 5CAM612FTT Tandem Axle Equipment Trailer
|Stock #: 501497||Exterior: black||GVWR: 11960|
|VIN #: 5JWCF1221KP501497||Num Axles: 2||Payload: 9660|
|Year: 2019||Width: 6||Weight: 2300|
|Manufacturer: Cam Superline||Length: 12|
| - Manual Top Wind Jack|| - Break away Switch|| - Electric Brake(s)|
| - Spring Suspension|| - Cambered Spring Suspension|| - Channel Crossmembers|
| - Baked Paint|| - Wood Floor|| - Treated Wood Floor|
| - Fenders|| - D-Rings Installed|| - Spare Tire Mount|
| - 7-Way Plug|| - Insulated Wire Harness|| - DOT Approved Lighting|
| - LED Lighting|| - Battery Charger|
Transporting scissor lifts, forklifts, small rollers, and other small industrial equipment requires a special trailer with a low load angle, maneuverability, and ease of operation. The CAM Superline 6x12 Tilt Trailers are designed to meet this need. The Dual Axle Tilt trailer is available in 3.5 and 5 ton capacities. The Dual axle tilt trailer features a Channel tongue, and come standard with our heavy 4-bolt fully adjustable hitch plate offering multiple position settings to match your tow vehicle.
The 6x12 tilt deck is mounted with a pivot point strategicaly located which allows it to tilt into the loading position via gravity. A tongue mounted hydraulic cushion cylinder provides variable adjustability of the gravity powered tilt operation. A hydraulic flow control valve with adjustment knob allows the user to control the speed at which the deck is tilted. A locking heavy duty latch secures the deck for transportation.
Standard decking is inch and a half tight-grained northern hemlock which provides long lasting durability and enhanced resistance to weathering. When hauling smaller equipment with a narrow concentrated center of weight, CAM Superline strongly recommends a forklift tread package. This tread package consists of (2) 10-inch wide steel tracks spaced to the wheelbase of your equipment. These tracks are reinforced and welded to the cross members of the frame, then layered with expanded metal for increased traction and support. This tread package insures structural support of your equipment rather than relying on deck boards to accommodate the load of your equipment.
The trailer is constructed with a heavy 5-inch angle mainframe, 3-inch channel cross members, heavy duty diamond plate fenders, and includes 4 D-ring tie-downs to secure your load. CAM Superline 6x12 tilt trailers come standard with Dexter Easy-Lube Axles with electric brakes and a slipper spring suspension.
Built for quality, value, and dependability, all CAM Superline trailers come standard with LED lights, a sealed, 1-piece heat-shrunk wiring harness, and a superior 2 component finish featuring an epoxy primer and PPG polyurethane paint providing the ultimate in corrosion resistance and long-lasting durability.
Back it all up with a 3-year warranty and it's easy to see - CAM Superline is your partner for the long haul!
GVWR: 11,960 lbs.
Empty Weight: 2,300 lbs.
Payload: 9,660 lbs.
Deck Length: 12'
Overal Width: 96"
Usable Deck Width: 75"
Deck Height: 16"
Axle Capacity: 5,080 lbs
Radial Tire Size: 225/75R15LRD
Main Frame: 6" x 4" x 5/16" Angle
Crossmembers: 3" Channel @ 4.1#
Tongue: 5" Channel @ 6.7#
Dexter E-Z Lube(TM) Axles (4" Drop)
Slipper Spring Suspension
Adjustable Hydraulic Cushion Cylinder
Diamond Plate Fenders
Spare Tire Mount
LED Lights - Rubber Mounted
Adjustable 2-5/16" Ball Coupler or Pintle
D-Ring Tie Downs - 5/8" (4)
(2) Banjo Eye Tie Downs
Pressure Treated Pine Decking
Zip Breakaway System
Sealed Wiring Harness
7-Way SAE Plug
Polyurethane Paint Finish
Colors (standard): Black, Yellow
Three Year Warranty
Extra Deck Width (102")
12K Bolt-on Drop Leg Jack
Spare Tire & Wheel
3/16" Diamond Plate Decking
Forklift Tread Package
Additional D-Ring Tie Downs - 5/8"
Optional Colors: Red, Gray,
Orange, Blue, Green